Epoxy vs polyaspartic: which floor coating belongs in your Arizona garage

Both go on concrete. They behave differently in Arizona heat and sunlight, and the price gap is real. Here is what actually differs — and what doesn't.

Side by side

EpoxyPolyaspartic
Typical cost (AZ)$3.50 – $10 / sq ft$8 – $12 / sq ft
Cure time (foot traffic)12–24 hours per coat; days to full cureWalk on it the same day; full cure in ~24 hours
UV & Arizona sunStandard epoxy can yellow under prolonged UV exposureUV-stable — won't yellow
Heat during installNeeds moderate slab temperature; Phoenix summer installs are trickyHandles wide temperature ranges, installs in hotter conditions
DurabilityStrong; well-prepped 100%-solids systems hold up for yearsMore flexible, resists impact and hot-tire peel; often used as a topcoat
LooksSolid colors, flake, and metallic finishes — metallics are epoxy's specialtyClear or pigmented; often over an epoxy/flake base

Which one to pick

What Arizona's climate changes about this choice

Why most Arizona quotes are actually hybrids

Many Arizona installers do not sell pure epoxy or pure polyaspartic — they sell a stack, and the trade-offs live in which layer is which:

Ask every bidder to list the exact layers and mil thickness of each — that question alone separates real quotes from sales visits. Our how-to-choose guide walks through comparing those answers.

The price is only half the answer

The coating you pick matters less than the prep underneath. Slab grinding, crack repair, and moisture testing drive most of the price differences you will see — see our Arizona cost guide for real 2026 ranges.

Compare Arizona contractors who install both systems — with license checks already done.

Browse contractors Request a quote