Metallic epoxy floors
Metallic epoxy is the premium end of Arizona floor coating — Published Arizona prices for a metallic floor run $4,000–$7,000. It is also the finish most often used to sell a house, which makes choosing the installer matter more, not less.
What metallic epoxy actually is
Metallic epoxy is 100%-solids epoxy tinted with metallic pigment — tiny reflective particles that move while the resin is wet. The installer manipulates the surface so the pigment settles into patterns. That means every floor is one of a kind, and it also means the floor depends on the installer's hand skill more than any other coating system.
- Looks: depth and movement that reads like polished stone, marble, or liquid metal — no seams, no grout lines.
- Material: 100%-solids resin builds a thicker, glossier film than the water-based kits sold at hardware stores.
- Skill: the pigment pattern cannot be fixed once cured. This is the system with the widest gap between good and bad installers.
Where metallic floors work in an Arizona home
- Interior rooms on slab: entryways, kitchens, great rooms, and hallways — the classic Arizona use case.
- Garages meant as finished space: workshops, home gyms, and converted garages where the floor is part of the living area.
- Shaded covered patios: acceptable out of direct sun, but UV exposure is the same issue as any epoxy — see our system comparison.
- Commercial showrooms and lobbies: a frequent premium use; see the commercial guide.
Not a fix for damaged concrete: metallic finishes are clear enough that cracks and patches underneath remain visible. Ask whether the slab is smooth enough before committing.
What it costs, and why
| Item | Typical Arizona range |
|---|---|
| Metallic epoxy floor | $4,000 – $7,000 |
| Standard two-car garage, for comparison | $1,200 – $4,500 |
| Per-sq-ft epoxy range, everything below metallic | $3.50 – $10 / sq ft |
Ranges compiled from published 2025–2026 Arizona contractor price pages. Full context on price variation is in the cost guide. Metallic pricing reflects thinner margins for error: every layer must go down clean, and the finishcoat is hand-manipulated.
What a premium quote should include
- A sample or mock-up of the actual pigment and pattern before the floor is poured — reputable metallic installers offer one.
- Full surface prep: grinding, patching, and a moisture test. On a premium floor there is no skipping this.
- Clear coat over the metallic layer for scratch and wear resistance, with mil thickness in writing.
- Which UV exposure is acceptable in your room, honestly.
- A warranty in writing — adhesion and peeling, not just gloss.
- A ROC license you can verify — start on verify.az.gov, and see how to choose.
Get a premium-floor quote
CoatCompass is an independent directory of public business listings. We do not independently verify licenses or certify specialist services. Confirm suitability and current ROC status yourself. Requests are reviewed by the directory; nothing is forwarded automatically, and later sharing requires your permission.
Request a quote Browse contractors